This 1 Hr Rated Exterior Wall For Modern Design

Use Where Wall Is Required To Be Rated From The Exterior And Interior Sides.

Thick 100 1 hour * 1 layer, 5/8 in. • 2009 irc requires walls built within 5’ of a property line or within 5’ of another building on the same property to have a 1 hour fire resistance rating with fire exposure from the exterior of the building (note: 1 hour fire rated exterior wall assembly.

Wd Stud—5/8 Sheetrock Brand Gypsum Panels, Firecode Rating Applicable To Fire N C Core, Interior—1 Foamed Plastic And 1/2 Plywd Siding— Exposure On Interior

* 2 layers, ½ in. 2009 irc requires walls built within 5 of a property line or within 5 of another building on the same property to have a 1 hour fire resistance rating with fire exposure from the exterior of. Comments system applications rating reference 1 hr.

Code* Requirements Vary) • An Addendum To The Assembly Allows For The Use Of Common Claddings, Including Smartside, Fiber Cement, And.

Bare metal thickness) corrosion resistant steel. 2x6 studs 16”oc batt insulation requirements are r19) 1. * 1 layer, ½ in.

• 2009 Irc Requires Walls Built Within 5’ Of A Property Line Or Within 5’ Of Another Building On The Same Property To Have A 1 Hour Fire Resistance Rating With Fire Exposure From The Exterior Of The Building (Note:

I #4 bar @ 32 o.c. (slotted track optional) elastomeric spray firestop glass fiber insulation (optional); What is 1hr rated wall?

5/8” Thick, 4’ Wide, Type C;

705.6 structural stability exterior walls shall extend to the height required by section 705.11. It also allows for the use of fiberglass insulation. Attached to floor and ceiling with steel fasteners spaced not greater than 24.

Siding (1 hr from exterior face) 3. Use where wall is required to be rated from the exterior and interior sides. Use the links below to review certified assemblies for the following fire retardants:

MDSAutoclaved Aerated Concrete Archives International.

3½ mineral fiber batts 5/8 type x gypsum wallboard (h) 2¼ #6 type s drywall screws @ 12 o.c. Wd stud—5/8 sheetrock brand gypsum panels, firecode rating applicable to fire n c core, interior—1 foamed plastic and 1/2 plywd siding— exposure on interior To download the drawings please click the links below. Cent of design load for the 45 min., 1 hr., 1 ½ hr and 2 hr ratings are as follows: • 2009 irc requires walls built within 5’ of a property line or within 5’ of another building on the same property to have a 1 hour fire resistance rating with fire exposure from the exterior of the building (note: Specifying 1 hour firerated walls Engineered Wood Blog